we have over 50 years experience in production and R&D,over 700 millions product capacity per annum we are able to provide with DN 15~DN500 different types of wafer meters

How to Insulate Your Water Meter for Cold Weather

insulate your Water meter before winter sets in. In some communities, you may have to pay the cost of replacing a broken meter if you did not insulate it as instructed by the utility company. Fortunately, it's very easy to insulate your water meter with some things you probably have on hand.

Woltman Water Meter, Single Jet Water Meter, Multi Jet Water Meter

Instructions

Things You'll Need:

  • Packing materials
  • Lawn bag with leaves
  • Insulating meter pad
  • Flashlight
  1. 1

    Buy an insulating meter pad if your local lumberyard is selling them. Hardware stores also carry them but most of the time, you can only find them in late fall, just before winter sets in.

  2. 2

    Locate your meter. You've probably walked past it hundreds of time, but you might not have opened it. It's like a little manhole, with a cover, either in the front of your yard near the street or in the back - near an alley or an easement.

  3. 3

    Remove the meter cover and set it aside. Shine your flashlight down into the hole to locate your meter. You may see some beetles scurry quickly away from your light but they won't hurt you.

  4. 4

    Place the pad or a double-bagged bag of dried leaves or packing peanuts in the hole. The bag should fit easily into the hole, covering the meter entirely and sealing off air around the edges of the bag. If you leave gaps, the cold air can filter down and freeze your meter.